1-24 RWD drift chassis kit 3D प्रिंट मॉडल

$10.50
लाइसेंस: बेसिक लाइसेंस
1-24 RWD drift chassis kit 3D प्रिंट मॉडल
$ 10.50
बुकमार्क हटाएं इस आइटम को बुकमार्क करें
  • कलेक्शन:
    No
  • प्रिंट के लिए तैयार:
    No
  • 3D स्कैन:
    No
  • एडल्ट कंटेन्ट:
    No
  • PBR:
    No
  • व्यूस:
    12239
  • तिथि:
  • आइटम ID:
    399960
  • रेटिंग:
इस आइटम की रिपोर्ट करें
d printed RWD drift chassis kit for 1/24~1/25 plastic model car.
Please refer this video for assembly : https://www.youtube.com/watch?v=PzG2QyEFwxw

Because it is wheelbase adjustable chassis (98~114mm), it can be applied to bodies of various sizes.
I maximized the advantages of 3D printing by designing various optional parts that can respond to variety type of 1/24 bodies.
Sliding is stable because it is designed with a geometric structure that makes it easy to drift.
The steering angle is large, so even if I make a mistake, the car doesn't seem to spin right away.
With this kit, you can make 1/24 high-performance drift car as much as you want.

New update : Short wheelbase parts, reinforced rear hubs.
https://www.youtube.com/watch?v=vwSTetYdpH8

[Necessary parts]

Diameter 2mm Shaft : 9mm-2pcs, 14mm-4pcs, 20mm-1pc, 30mm-1pc

M2 countersunk bolt : 5mm-3pcs, 6mm-40pcs, 10mm-12pcs, 20mm-1pc

M2 socket head bolt : 6mm-20pcs, 10mm-2pcs, 15mm-6pcs, 24mm-2pcs

M2 nut (3.9mm wide, 1.5mm thick)-35pcs

M2 ultra thin flat wafer head bolt : 4mm-8pcs, 6.2mm-2pcs, 7.1mm-2pcs
https://www.**********.com/item/1005001596813595.html?spm=a2g0o.9042311.0.0.20f14c4dZna5kg

Inner 6mm, outer 10mm, thickness 3.0mm bearing-2pcs
Inner 2mm, outer 5mm, thickness 2.5mm bearing-2pcs
https://www.**********.com/item/33006120960.html?spm=a2g0o.9042311.0.0.20f14c4dZna5kg

Inner 3mm, outer7mm, thickness 2.0mm bearing-8pcs
https://www.**********.com/item/33006120960.html?spm=a2g0o.9042311.0.0.20f14c4dZna5kg


M2 ball end(001 M2)-8pcs
https://www.**********.com/item/32620209760.html?spm=a2g0o.9042311.0.0.27424c4dxxyEJD


0.4mm wire, OD 6mm, length 20mm spring-2pcs
0.4mm wire, OD 5mm, length 10mm spring-2pcs
https://www.**********.com/item/1005002738819545.html?spm=a2g0o.9042311.0.0.20f14c4dZna5kg

0.5 module 32t spur gear-2pcs
https://www.**********.com/item/33014557525.html?spm=a2g0o.9042311.0.0.27424c4d1kHKjq

0.5 module 18t pinion gear-1pcs
0.5 module 15t pinion gear-1pcs
0.5 module 10t pinion gear-1pcs
https://www.**********.com/item/33015356835.html?spm=a2g0o.9042311.0.0.27424c4d1kHKjq


drift tire-1set(4pcs)
https://ko.**********.com/item/1005003397630960.html?spm=a2g0o.productlist.0.0.585e7d334anyLR&algo_pvid=aa2894be-1765-4f8f-8b2b-f6c46e40327e&algo_exp_id=aa2894be-1765-4f8f-8b2b-f6c46e40327e-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000025600513039%22%7D&pdp_pi=-1%3B3.64%3B-1%3B49%40salePrice%3BUSD%3Bsearch-mainSearch

[Necessary tools]

M2 tap tool
M2 Hex wrench
Drill - 1.7mm, 1.9mm, 2.0mm, 2.1mm
Plus driver
File, knife, saw....etc.

[Necessary RC parts]
Transmitter, receiver
Li-po(2s 300~500mah)battery
Gyro प्रिंट के लिए तैयार: नहीं
क्या आपको और फ़ॉर्मेट्स चाहिए?
अगर आपको किसी अलग फ़ॉर्मेट की जरूरत है, तो कृपया हमें कन्वर्शन अनुरोध भेजें। हम 3D मॉडल को इसमें कन्वर्ट कर सकते हैं: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. हम 3D दृश्यों को कन्वर्ट नहीं करते हैं और .step, .uges, .stp, .sldprt जैसे प्रारूप।!
और पढ़ें

डाउनलोड करें 1-24 RWD drift chassis kit 3D प्रिंट मॉडल stl stl से jaewuku9

rwd drift 124 rc car wheelbase adjustable
इस आइटम के लिए कोई कमेंट्स नहीं है।
रेटखरीददारक़ीमततिथि
पॉज़िटिव

Good, but the support is kinda poor

$9.002024-12-31
पॉज़िटिव

Awesome design, but requires a lot of hardware…

$10.002024-04-14

संबंधित आइटम्स से 1-24 RWD drift chassis kit