gaz-aa 3D मॉडल

$15.00
लाइसेंस: बेसिक लाइसेंस
gaz-aa 3D मॉडल
$ 15.00
बुकमार्क हटाएं इस आइटम को बुकमार्क करें
  • बहुभुज:
    58500
  • वर्टिसिस:
    31000
  • टेक्सचर:
  • रिग्ड:
    No
  • सामग्रियां:
  • लो-पॉली:
    No
  • कलेक्शन:
    No
  • UVW मैपिंग:
  • इस्तेमाल किए गए प्लगइन्स:
    No
  • प्रिंट के लिए तैयार:
    No
  • 3D स्कैन:
    No
  • एडल्ट कंटेन्ट:
    No
  • PBR:
  • ज्यामिति:
    Polygonal
  • खुला हुआ UVs:
    Non-overlapping
  • व्यूस:
    2224
  • तिथि:
  • आइटम ID:
    308232
  • रेटिंग:
soviet cargo truck since 1932. the gaz-aa is a license-built version of fordd model aa by gaz 1932–1942. it had a four cylinder, 40 hp engine and could reach a top speed of 70 km/h on roads. this workhorse was placed into a variety of roles by the red army including supply hauling, troop transport, ambulance, fueling, and was also converted to mount either the 25-mm aa or quadruple maxim machine years of production: 1932 - (1938) - 1942 - 1943 - 1944 - 1946, (26 x 1947 - 1950 - uaz)

4x2 1500 kg truck

overall amount: more than 1 million units engine: 40hp/2200rpm, 4-cyl, carburettor, 4-stroke, 3285cc bore/stroke : 98.43/107.95mm compression rate: 4.2:1 gearbox: 4 speeds + 1 rear length: 5335mm; width: 2040mm; height: 1970mm inner platform dimensions: 2450mm x 1870mm wheelbase: 3340mm , rear axis clearance: 200mm clutch: single disk, dry mechanical brakes tyres: 6.50-20 inches. fuel capacity: 40 l weight: 1810 kg maximal speed (highway, loaded): 70 km/h fuel consumption: 20.5 l/100km प्रिंट के लिए तैयार: नहीं
क्या आपको और फ़ॉर्मेट्स चाहिए?
अगर आपको किसी अलग फ़ॉर्मेट की जरूरत है, तो कृपया हमें कन्वर्शन अनुरोध भेजें। हम 3D मॉडल को इसमें कन्वर्ट कर सकते हैं: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. हम 3D दृश्यों को कन्वर्ट नहीं करते हैं और .step, .uges, .stp, .sldprt जैसे प्रारूप।!
और पढ़ें

डाउनलोड करें gaz-aa 3D मॉडल obj से DEHuCKA

blender truck vehicle old military
इस आइटम के लिए कोई कमेंट्स नहीं है।


देखे गए आइटम
tjo 14 3D प्रिंट मॉडल