ImmenseFreebie Lint roller tire cleaner
फ्री 3D प्रिंट मॉडल

$0.00
बुकमार्क हटाएं इस आइटम को बुकमार्क करें
  • उपलब्ध फ़ॉर्मेट्स:
    Stereolithography: stl 252.75 kb
  • कलेक्शन:
  • प्रिंट के लिए तैयार:
  • 3D स्कैन:
    No
  • एडल्ट कंटेन्ट:
    No
  • PBR:
    No
  • व्यूस:
    2413
  • तिथि:
  • आइटम ID:
    404160
  • रेटिंग:
This work in progress enables you to use readily available lint rollers to easily clean dust from slot car tires. Turn the crank a couple turns and you're done without ******* fumbling.

Print two carrier pieces and slide them into the base-plate. IF it feels too tight, sand the dovetail edges a bit, and glue with C/A glue when in place.

Print two hubs, they go into the roller tube, and you can print one or two handles and knobs.

You will need to source 1/4 inch hexagonal aluminum stock for the axle. I got some at Online Metals .com, for not too much money. You can use bits of 3/32 slot car axle for the handle spindles.

I hope you find this free tire cleaner useful!
क्या आपको और फ़ॉर्मेट्स चाहिए?
अगर आपको किसी अलग फ़ॉर्मेट की जरूरत है, तो कृपया हमें कन्वर्शन अनुरोध भेजें। हम 3D मॉडल को इसमें कन्वर्ट कर सकते हैं: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. हम 3D दृश्यों को कन्वर्ट नहीं करते हैं और .step, .uges, .stp, .sldprt जैसे प्रारूप।!

डाउनलोड करें ImmenseFreebie Lint roller tire cleaner फ्री 3D प्रिंट मॉडल stl से ImmenseMiniatures

slot car slotcar
इस आइटम के लिए कोई कमेंट्स नहीं है।